How do I put the Intex Easy Set pool away?

Fold your Intex pool for storage, fold the wall part of the material in on all sides, then with two people, pull one side of the pool over to meet the other side. From here, keep folding in half until you have a long strip, about 3-4 feet wide. Roll or fold this up into a manageable size.

How do you prepare the ground for an easy set pool?

7 Easy Steps to Level the Ground for Your Easy Set Pool

Step 1: Select the location.
Step 2: Prepare the Ground.
Step 3: Drill the 2×4 Arm and Pin It to the Ground.
Step 4: Place the Bubble Level on the Arm, Spin and Check It.
Step 5: Adjust the Ground According to the Level.
Step 6: Water and Tamp Down the Ground.

How do I clean my pool before putting it away?

” Just drain 3/4 of the pool, add ALL the algaecide, slosh it around with a brush, and leave it overnight. Slosh again the next day and finish draining. That should take care of your algae, and give you a clean pool to refill.”

Can I leave my Intex Easy Set pool up all winter?

In warmer climates, Intex advises to keep your pool up, if you prefer. However, you must winterize the pool when keeping it full throughout the winter. If your area maintains tropical climates all year long, you may not need to winterize your pool at all, especially if you use your pool on a regular basis.

How do you store a pop up pool?

Other than installing a winter cover, this is the final step.

Get That Storage Space Sorted.
Take Those Lines Down—and Dry Them Out.
Fix Up That Pump.
Give Your Filter One Last Go.
Take Down Your Accessories.
Make Some Space.
Let Your Walls Down.
Fold… and Fold… Your Pool Liner.

How to drain your Intex easyset pool-YouTube?

To avoid this, cancel and sign in to YouTube on your computer. The Intex EasySet Pool is simple and easy to maintain but only if you know what to do.

When to drain and fold an Intex pool?

You may want to begin draining an Intex pool the night before you plan to dry, fold and store it. Dry the pool. After complete draining, your pool will need to dry completely before folding. For Frame Set™ pools, this may be easier if the pool is left standing, to allow it to air dry.

Do you need to add chemicals to an Intex pool?

Adding opening chemicals to your Intex pool is a simple process that won’t take more than an hour or so. And while Intex pools do resist stains better than permanent pools, they’re not immune. So to avoid dealing with green algae, cloudy water, or stains, take time to balance pool chemicals. Here are the chemicals you’ll need:

How to get away with Intex easy set not being level?

I say this not to discourage you from experimenting with pool ownership, but so you will be encouraged knowing a pool with a properly sized skimmer, filter, and pump is infinitely easier to manage. Keep the chlorine up using liquid chlorine and skim off floating debris with a net. Get a good FAS/DPD test kit.

What should I do if my Intex pool starts to drain?

If draining to an open area, you may want to move the hose during draining to avoid erosion or over-saturation. On some Intex pools, you may need to screw a Hose Adapter onto the female garden hose end and then thread the hose adapter into the drain valve. This will prevent the water from coming out immediately when you remove the drain cap.

Is the white space in an Intex pool level?

The white space is all fairly level ground. Shaded areas represent drops of approx 2″ to 5″. There may be a couple more small spots. This area is all grass and I’d like to keep as much as possible. Again, next year when I put in a more permanent pool it would be going in another area that I would dig up and level properly.

How big is an Intex easy pool set?

(BTW, if anyone purchases one of the 15′ by 42″ Easy Sets off Amazon, you can thank me for them reducing their price lol) *NOTE: There will be no children in, or anywhere near the pool or by my house. Only thing in the pool would be 2 adults and a floating cooler of beer.