How do I make my RV hot water work?
Wondering how to start the hot water in your RV? In most cases, turning it on is easy: you simply locate your RV electric water heater switch and toggle it to “on.” If your camper water heater is in gas mode, the igniter will have to click on the pilot light — or the pilot light may even need to be lit manually.
Are RV water heaters gas and electric?
The two main types of energy for RV water heaters are electric and gas. Electric will require you to have your RV running to heat the water, and gas can utilize heat from the engine or simply uses a gas-powered pilot light.
What’s the hot water temp in my Jayco?
Another trap for the unwary, when i received my new Jayco i found that the hot water temperature as measured from the Hot water heater pressure relief valve was about 60 c but from the hot tap only a trickle of luke warm water.
Where did the water tank overflow in Jayco?
We had this issue intermittently this time last year when we were travelling through WA. The tanks would be empty, then over a period of time while in CP’s connected to water, they would fill and eventually overflow back out of the vans 2 fill points.
How does a 3 year old caravan get hot water?
3 year old caravan we live in 24/7. Hot water heats up on gas and electricity to proper temp, tested by relief valve. By the time it gets to the outlets, it’s luke warm. This happens on both mains water and caravan tanks. The taps are running for a while and still Luke warm.
Is there a non return valve on Jayco water pump?
Jayco in their wisdom cut corners and do not fit that non-return valve. Rather than waiting for the pump to break down I would suggest you take it upon yourself and correct this poor workmanship. Fit a non-return valve at your convenience rather than have the pump fail an an inconvenient time.
What are the problems with the Jayco hot water heater?
Jayco Hot Water Heater Problems Weak Thermocouple or Gas Control Magnet. If the thermocouple or the gas control magnet become weak and stop functioning… When There Is No Sparks on Electrodes. It is advisable to secure electrodes to the main burner and wire connection on… Failure of the Gas
We had this issue intermittently this time last year when we were travelling through WA. The tanks would be empty, then over a period of time while in CP’s connected to water, they would fill and eventually overflow back out of the vans 2 fill points.
Jayco in their wisdom cut corners and do not fit that non-return valve. Rather than waiting for the pump to break down I would suggest you take it upon yourself and correct this poor workmanship. Fit a non-return valve at your convenience rather than have the pump fail an an inconvenient time.
How much does a Jayco Van pump cost?
As the above suggests most Jayco vans suffer this fate. Usual answer is new pump $180 thankyou. Got a part number (Coast to Coast) to order through an agent.
