How do I get my Cal Spa out of sleep mode?

I have shut it off and restarted. I have seen this happen with Cal Spas. On them you need to press the ‘TEMP’ button and then the ‘LIGHT’ button within three seconds of each other and this will change the modes from EC (economy mode), to SL (sleep mode) and finally to ST (standard mode) which is what you want. Welcome!

How do you reset a Cal Spa?

Check water level in spa. Refill if necessary. Make sure pumps are been primed and filter cartridges are clean. Press any button to reset or wait 15 minutes and spa will automatically reset.

How to reset spa message on calspas.com?

Press any button to reset or wait 15 minutes and spa will automatically reset. If message spa does not reset, call customer service. Insufficient water detected in heater. Spa is shut down. (Displays on third occurrence of dr message.) Follow directions for dr message and press any button to reset spa.

What do you need to know about Cal spas?

Cal Spas. Consumers can add a Spa Surround to any of the company’s hot tubs that makes the whole hot tub area look custom to their backyard. Cal Spas is one of the oldest manufacturers of hot tubs in North America and with that comes tremendous experience and a quality product.

How to order a new Cal Spa hot tub cover?

When ordering your Cal Spa replacement hot tub cover just leave the dimensions field blank. Leave us a note in the note section saying what model you have, and The Cover Guy will take care of the rest. You can Order your new Cal Spa Replacement Spa cover here.

How can I see the temperature of my spa?

If you wish to see the current spa temperature, either switch to Standard mode or turn Jets1 on for at least two minutes. After the pump has been running for 2 minutes, the temperature will be displayed. When your spa is first actuated, it will go into priming mode.

How do I Turn Off my Cal spa?

There are 3 modes in a Cal Spa. (St) Standard, (Ec) Economy and (Sl) Sleep You want it in Standard mode, so press the temp button and the light button within 3 seconds of one another and it will sequence to the next mode, repeat till you are in Standard mode. In Ec it will only heat in filter cycle

Is there a sleep mode on a Cal spa?

There are 3 modes in a Cal Spa. You want it in Standard mode, so press the temp button and the light button within 3 seconds of one another and it will sequence to the next mode, repeat till you are in Standard mode. In Sleep mode nothing works so do not use that. That mode is for cleaning and replacing filters.

Is there a standard or EC mode on a Cal spa?

Verified There are 3 modes in a Cal Spa. (St) Standard, (Ec) Economy and (Sl) Sleep You want it in Standard mode, so press the temp button and the light button within 3 seconds of one another and it will sequence to the next mode, repeat till you are in Standard mode. In Ec it will only heat in filter cycle