How do I fix the Balboa Dr code?

How do I fix the Balboa Dr code?

How do I resolve the Error dr on Balboa MVP260 touchpad?

1. Check the water level in the spa.
2. Refill if necessary.
3. If the water level is okay, make sure the pumps have been primed.
4. Press any button to reset, or this message will automatically reset within 15 minutes.

What does Dr mean on my hottub?

Water Level A message such as “dr” or “dry” or “heater dry” is a warning that there’s no water in the heater tube, says Niagara Hot Tubs. If the water is low, add water to the proper level and try restarting the pump and heater.

How to check water temp on Balboa hot water heater?

Make sure that the water temperature displayed on the topside panel is at least 1 degree below the heater set temperature and set the control to standard mode. 2. Check voltage across the two connections to the heater. Your meter should read either 120 or 240 volts depending on your installation.

What are the error codes on the Balboa spa?

Balboa Spa Side Error Codes pd Power supply, unit running on battery ba OH Sensors reading 112-118° F. OHH Overheat. Spa has shut down. One sensor OHS Overheat. Spa has shut down. One sensor

Is it safe to replace a Balboa hot tub heater?

Although they are extremely good at what they do, they are not immune to breaking. This article will discuss how to troubleshoot your Balboa hot tub heater. It is important to note that it is never safe, or a good idea to replace a spa heater element.

How to get technical support for Balboa direct?

Disconnect all the components (i.e., pumps, blower, ozonator heater) and plug them back in one at a time to verify which component is causing the GFCI to trip. 3.

Make sure that the water temperature displayed on the topside panel is at least 1 degree below the heater set temperature and set the control to standard mode. 2. Check voltage across the two connections to the heater. Your meter should read either 120 or 240 volts depending on your installation.

Where can I find the Balboa BP troubleshooting manual?

42211 C Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group. Balboa’s BP Troubleshooting & Service Manual SPA CONTROL SYSTEMS PANELS60 Hz BP500 BP2000G1 TP900, TP800, TP600, TP400 THIS MANUAL COVERS THE FOLLOWING:

What should water temp be on Balboa mvp260?

One of the Water Temp Sensors has detected 118°F (47.8°C) In the Heater and Spa Functions are Disabled. You Must Press Any Button to Reset when Water is below 108°F (42.2°C). Check for Water Level, Flow Restrictions, Closed Valves, Air Bubbles, and Pump Prime, or Continue for a Detailed Test Procedure.

What is the installation manual for Balboa spa?

This Installation Manual is provided solely to aid qualified spa service technicians in installing spas with control systems manu- factured by Balboa Water Group. Balboa controls have absolutely no end user serviceable parts. Balboa Water Group does not authorize attempts by the spa owner/user to repair or service any Balboa products.