How do I drain and unlock my Samsung washing machine?

How do I drain and unlock my Samsung washing machine?

The washing machine door will be locked when it detects water in the unit. Wait and see if it drains out by itself. When water is no longer in the washer, reset the washer by pressing the ON/OFF or START/PAUSE button. Then wait for a minute to pass, and you can then unlock the door.

How do I unlock my Samsung washer door?

The door may be locked for two reasons : The washer is too hot. Water remains in the washer….Simply do the following:

1. Press the Start/Pause button to unlock the door.
2. Open the door, then add/remove laundry.
3. After closing the door, press the Start/Pause button to restart the wash.

What do you do if your Samsung washer won’t drain?

Twist the drain hose cap counterclockwise to slowly remove it and drain the water. After the water is drained, remove the filter and clean it with a soft toothbrush. Inspect the filter housing and remove any visible dirt or debris. Reinsert the filter, replace the cap, and turn it clockwise until it’s secure.

How do you reset a Samsung washer?

Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.

Why is the door on my Samsung washer locked?

Samsung washer door is locked Your washer door locks to prevent water from coming out (especially for front load models). Child Lock also will lock the door on some models, like front loaders. Normally waiting for the cycle to end is all you need to do to unlock the door, or turn your washer on if it’s off.

What to do if your Samsung washer is not draining?

Do not remove the screw on the back of the washer that holds the drain hose against the washer. If the screw has been removed, screw it and the holder back in with any screw that fits. If the holder is missing, service is required. Inspect the drain hose.

Where is the emergency drain hose on a Samsung washer?

Front load models will lock the door while water is detected inside the washer to prevent it from spilling onto your floor. The emergency drain hose is located by the pump filter (also called a debris filter). Some older front load models do not have a pump filter or an emergency drain hose.

What to do if your front load washer is locked?

Some older front load models do not have a pump filter or an emergency drain hose. The steps for draining the emergency drain hose can be found in our guide on cleaning the pump filter. When the emergency drain hose no longer has any water coming out, turn the washer off and back on again. This time the door should unlock.

Do not remove the screw on the back of the washer that holds the drain hose against the washer. If the screw has been removed, screw it and the holder back in with any screw that fits. If the holder is missing, service is required. Inspect the drain hose.

Samsung washer door is locked Your washer door locks to prevent water from coming out (especially for front load models). Child Lock also will lock the door on some models, like front loaders. Normally waiting for the cycle to end is all you need to do to unlock the door, or turn your washer on if it’s off.

Front load models will lock the door while water is detected inside the washer to prevent it from spilling onto your floor. The emergency drain hose is located by the pump filter (also called a debris filter). Some older front load models do not have a pump filter or an emergency drain hose.

Some older front load models do not have a pump filter or an emergency drain hose. The steps for draining the emergency drain hose can be found in our guide on cleaning the pump filter. When the emergency drain hose no longer has any water coming out, turn the washer off and back on again. This time the door should unlock.