How do I clean my IntelliChlor salt generator?
Install the acid cleaning kit on the IntelliChlor unit as described on the previous page. 3. Mix one quart of muriatic acid with one gallon of tap water in a plastic five (5) gallon bucket. Always add acid to the water, never add water to the acid.
How often should you clean a Pentair salt Cell?
Acid Washing the Electrolytic Cell If the electrolytic cell has a tendency to scale, it is recommended that every two months the cell be removed and inspected for scale formation and/or debris. Some filters allow debris to pass through to the cell, possibly lodging between the plates in the cell.
What should the salt level be on a Pentair ic40?
Went back for another reading and the salt level was still within range. Called Pemtair and was told that the IC40 unit is set for optimal operating at 77 degrees. For each degree below that, the unit reads 100 ppm less salt. I told him I thought he was crazy.
When do the LEDs flash on the Pentair ic40?
The 3 salt levels LED’s Red, Yellow, and Green are designed to repeatedly flash for the about 2 minutes after every startup. Hence, wait for about 2½ minutes to allow the Pentair IC40 to properly sense the level of salt. After that, 1 of the 3 LED’s will be illuminated displaying salt level.
How long does an intellichlor Pentair ic40 last?
That means that the Pentair IC40 life is running out – limited life remaining. Under proper operation, the intellichlor should provide at least 10,000 hrs. of operation, which is 3-5 years of service. In many instances, you can extend the life if you monitor the level of chlorine properly and the salt and chemical balance level.
Is the flow light on or off on Pentair intellichlor?
Interesting – so i did have it rewired back to normal, and the flow light was RED as usual and cell light OFF. I turned it up to 100, and the flow light turned GREEN and Cell light came on Green. This is a good thing, i think.
Went back for another reading and the salt level was still within range. Called Pemtair and was told that the IC40 unit is set for optimal operating at 77 degrees. For each degree below that, the unit reads 100 ppm less salt. I told him I thought he was crazy.
That means that the Pentair IC40 life is running out – limited life remaining. Under proper operation, the intellichlor should provide at least 10,000 hrs. of operation, which is 3-5 years of service. In many instances, you can extend the life if you monitor the level of chlorine properly and the salt and chemical balance level.
How does the Pentair intellichlor cell keep pool clean?
The Pentair Intellichlor cell turns ordinary salt into chlorine on a continual basis to keep your pool clean and sanitary. The Pentair Intellichlor cell keeps track of salt levels, chlorine output, pool temperature and cleanliness.
How big is a Pentair replacement salt cell?
The Pentair IntelliChlor IC40 Replacement Salt Cell is designed to sanitize pools up to 40,000 gallons. The Pentair IntelliChlor IC40 Salt Cell includes a lengthy 15 foot UL-approved cable.
