How deep is a 12ft pool?
1. The Intex 12′ x 30″ Metal Frame Pool Set is 12 feet across and 30 inches tall. The water depth is approximately 24 inches.
How do you hook up a pool pump?
Place a hose clamp on the opposite end of the hose. Slide the hose over the front end of the pump. This is the suction, or intake, end of the pump/motor assembly and usually leads to an enclosed basket. Tighten the hose clamp securely with the screwdriver.
How do you connect a hose to a pool filter?
Place a hose clamp over the other end of the short hose. Attach it to the filter and tighten the screw. Slip a hose clamp over one end of the second long hose. Slide this hose onto the return-to-pool fitting on the top of your filter. Tighten the clamp’s screw. Place a hose clamp on the opposite end of this hose.
Where are the hoses on a pool pump?
The second hose connects to the top of the pump (behind the strainer housing) and goes to the port on the multiport valve labeled “pump”. This is usually a shorter, heavy duty hose that is different from the others. Slide the clamps over the end of the hose and install the hose on those fittings.
Where do you hook up an Intex pool pump?
Place the Intex pool pump on a level area or surface, 2 feet away from the hose connection on the pool wall. Place the nozzle union into the upper hose connection. The upper hose connection is located on the filter part of the pump. Connect the strainer union by placing it into the lower hose connection.
Place a hose clamp on the opposite end of the hose. Slide the hose over the front end of the pump. This is the suction, or intake, end of the pump/motor assembly and usually leads to an enclosed basket. Tighten the hose clamp securely with the screwdriver.
How do you connect hoses to an above ground pool?
Select one of the long hoses from your pool supplies — above-ground pools usually have two identical-length hoses and a third shorter hose. Place a hose clamp on one end of the hose. Slide that end over the hose fitting at the base of the skimmer.
How does a sand filter connect to a pool pump?
There are 3 hoses for you to connect when installing your sand filter. The first hose connects from the thru-wall skimmer on the pool to the front of the pump, also known as the strainer housing. On the skimmer there should be a fitting where the hose will connect. Loosen the clamps that came with the filter and slide them over the hose ends.
How do you connect a pool filter to a strainer?
The first hose connects from the thru-wall skimmer on the pool to the front of the pump, also known as the strainer housing. On the skimmer there should be a fitting where the hose will connect. Loosen the clamps that came with the filter and slide them over the hose ends. Install one end of the hose onto the skimmer fitting and tighten the clamp.
