How can I tell if my Sundance Spa is having problems?

The only way to test this is to make sure there is no loose debris in the spa, then pull the filter out and see if the flow error goes away, if it does, it is the filter. 2. Defective Circ Pump or Flow Switch: Need to check for Circ Pump operation. Is there voltage going to pump, Is there adequate Flow coming out of Heater Port in Spa?

What kind of circulation pump does Sundance Spa use?

Note: This test only works on 850 Series with Circulation Pump prior to 2001: Try turning the #1 pump which is 2 speed.

What is the diagnostic accuracy of Maudsley’s test?

A study investigated the diagnostic accuracy of Maudsley’s test indicated 88% sensitivity., 85% positive predictive value, in correlation with Ultrasonography.

Why are there so many shows on Sundance TV?

She’s newly engaged and struggles to grow at work, while he battles self-destructive writer’s block after having his heart broken. The talent behind this year’s most talked-about television open up about the challenges and triumphs of creating critically acclaimed work.

Is the audience free to seek the Sun Dance Vision?

They are now free to seek their Sun Dance vision. Simultaneously the tribe, the entire audience, is seeking its vision.

What was the purpose of the Sundance Sun Dance?

Sun Dance. The sundance is the predominant tribal ceremony of Great Plains Indians, although it is practiced by numerous tribes today as a prayer for life, world renewal and thanksgiving.

What happens when a spa goes into the watchdog?

When the spa goes into the Watchdog the spa will not operate. This is how it happens: When you try to use the spa, you will see 3 or 4 dashes on the control panel (depends upon the model).

What to do if your Sundance Spa hot tub is not working?

If condition persists, contact your Sundance Spas dealer or qualified service technician. If the hot tub water is more than -7C cooler than the temperature set point, jets pump #1 and heater will automatically activate to provide freeze protection.

Do you need a cover guy for a Sundance spa?

If you are needing a replacement hot tub cover for your Sundance® Spa The Cover Guy is your answer. With all Sundance® Models on file The Cover Guy can easily provide you with a new hot tub cover without you having to measure.

Why does my Sundance spa go into Oh error code?

Another issue that comes up and is an indication of a bad temp sensor is the temperature reading becomes inaccurate or the spa is going into the OH error code. If you power the spa down and power it back up it may work for a while but will do the same thing again. You need to replace the Temp Sensor. 3. FLO or OH Error Code

What are the functions of a Sundance Hot Tub?

There are a number of unique functions designed into your Sundance hot tub to protect it from damage and/or to aid in troubleshooting. The indicator light located on the front cabinet panel of the spa is an early detection system that will notify you when the spa needs immediate attention.

How big is the Sundance spa blower motor?

Year: 2007 Model:Cameo Size:89″ x 89″ x 37�5″ Series:880 Blower: 1hp 240V blower motor assembly 6500-148

When was the first season of Sundance Spas?

2006 780 Series �� 24

Year: 2007 Model:Cameo Size:89″ x 89″ x 37�5″ Series:880 Blower: 1hp 240V blower motor assembly 6500-148

Note: This test only works on 850 Series with Circulation Pump prior to 2001: Try turning the #1 pump which is 2 speed.

2006 780 Series �� 24

What to do if your hot tub controller is not working?

Resetting the spa by turning off the power, waiting and turning it back on is likely to resolve the issue. If these troubleshooting tips don’t solve your problem, consult the owner’s manual for your controller. You can also contact the manufacturer for technical help.

What happens when Sundance spa goes into watchdog?

When the spa goes into the Watchdog the spa will not operate. This is how it happens: When you try to use the spa, you will see 3 or 4 dashes on the control panel (depends upon the model). If you try and reset your breaker, sometimes it comes on but it will probably go back into Watchdog error – – – -.

What to do if your Sundance spa heater is not turning on?

Heater is deactivated and pump may not turn on. Flow/pressure switch is defective. These steps should only be taken after checking and testing the above steps. With the circ pump and the main pump off, test switch operation with an ohmmeter in the continuity position, test for continuity across switch terminals.

Can you wire up a jacuzzi with 4 wire?

The Spa Guy is talking here about the ins and outs of wiring a 3 Wire Jacuzzi Premium, Sundance, Vita Spa, Keys Backyard or other brand instead of the normal… AboutPressCopyrightContact usCreatorsAdvertiseDevelopersTermsPrivacyPolicy & SafetyHow YouTube worksTest new features

Can a closed flow switch on Sundance Spas be repaired?

CLOSED or SHORTED FLOW SWITCH ON SYSTEM STARTUP (system disabled) Flow switch is non-functional. This must be repaired only be a Sundance Spas dealer or qualified service technician.

What does Flo code mean on Sundance heat pump?

I found it easily at the Sundance site online and keep a copy on my computer for reference. Nine times out of ten, a flo code means the pressure switch isn’t working, and ergo your circa pump wont work right, nor usually the heat. It’s a cheap part and won’t take a repair guy more the 20 minutes to fix.

What is the error code on the Sundance Spa hot tub?

Sn1 Error Code: Heater is deactivated. High-limit sensor located in the heater drywell is nonfunctional. Sn3: Heater is deactivated. Main temperature sensor located in filter bucket is nonfunctional. 6. ILOC Error Code ILOC Error Code: Hot Tub is deactivated.

When did Sundance Spas start making hot tubs?

Sundance® Spas has been manufacturing hot tubs since 1979. They are based out of California, and their products are sold in more than 60 countries. Sundance® Spas focuses on creating acrylic spas, and they are rated as the top worldwide distributor and manufacturer of this particular style. They also produce in-ground and portable hot tub models.

What to do if the main pump is off in Sundance spa?

If debris is present, remove debris, install switch and test system. If condition still exist, replace switch.) if switch measures infinite (no continuity) with pump off, switch is OK, Turn on Main pump and measure across switch terminals for continuity. If continuity is measured, switch is OK.

How can I tell if my Sundance spa filter is defective?

What is the FL1 error code for Sundance spa Constance?

We have a Sundance Spa Constance (2011) and today also noticed the FL1 error code. In addition to the code, noticed that the pool is registering 72 degrees when it is set to 101. We have never had a problem with the hot tube, until now. We changed the UV bulb last summer and changed out the filters. Any assistance would be helpful.

How long has Sundance Spas been in business?

I can opt out at any time by selecting the unsubscribe option that appears at the bottom of every email. Sundance® Spas has been manufacturing hot tubs since 1979. They are based out of California, and their products are sold in more than 60 countries.

CLOSED or SHORTED FLOW SWITCH ON SYSTEM STARTUP (system disabled) Flow switch is non-functional. This must be repaired only be a Sundance Spas dealer or qualified service technician.

How many degrees are in the Sundance Spas temperature sensor?

Fareinheit Celsius OHMSΩ 59.00 15 48840 60.8 16 46680 62.6 17 44610 64.4 18 42630

How long does a Sundance Hot Tub last?

Sundance Spas can last up to 20 years if properly maintained. Sundance Spas come with a warranty that covers five years on parts and labor and 10 years on the shell. How long does it take to heat a Sundance spa? A Sundance hot tub can take anywhere from four to eight hours to heat, depending on outside temperature and the location of the spa.

Which is the best brand of Sundance Spas?

If you have a hot tub you plan to use as a trade-in, Sundance gives you a quote on its value if you fill out a form on the company’s website. All Sundance Spas models come with a footwell, and most include multiple adjustable jets. Some of the most popular Sundance models include the Optima, Cameo, Chelsee and Altamar.

What is the remote control panel for Sundance spa?

The Aqua Terrace remote control panel model 6600-855 is found on 2005 and later model year 880… Sundance Spa Control Panel 680 6600-236 is a SPECIAL ORDER item with lead time of 3-4 weeks. This control panel with 6 buttons is used in 2018 and newer model Sundance Spas including Peyton, McKinley and Edison as well as other models.

When did spa side control panels come out?

Sundance Spas came out with their own Spa Side Control Systems and Printed Circuit Boards in 1991. These Spa Side Control Panels are unique to Sundance Spas. This is the first 800 Series Control Systems for Sundance Spas. We stock all Sundance parts. Spa Side Control Panels for Inground Sps.

What causes Flo error message on Sundance Altamar spa?

I have a Sundance Altamar spa, and I’ve occasionally had that FLO error message too in the past. If I recall it might have been caused by air in the lines (not filling tub properly?) or possibly from obstruction. I had one of the small cotton intake covers get sucked into pipes before.

What should I do if I get a Flo error on my spa?

Some of them may require a skilled technician to come out and work on your spa for you. 1. The first thing to do if you have a FLO error is to remove your filter and clean it. A FLO error is going to indicate something is wrong with your circulation system, so start with the simplest problem: your filter.

Are there any problems with my hot tub?

Hot Spring ® spa systems are reliable and will last a long time with regular maintenance, but issues do sometimes arise. To help set you on the right track toward fixing minor hot tub problems with jets, pumps, heaters, electrical systems, controls, and water quality, we’ve created an easy-to-follow chart below.

When do you get error code on your hot tub?

Updated on: December 23, 2020. Posted on: March 29, 2018. You likely look forward to a hot tub soak every day. So, when you see an error code on your spa’s control panel, you might worry that you’ve lost your chance. But don’t fret!

Why is the FL1 code flashing on my Sundance spa?

the TB1 terminal block and then power up the spa. If the pump doesn’t run you could have a bad pump. I have a 2004 Sundance Lagunas Spa that also has the Fl1 error code. I have had them in the past, and was able to reset it with the hose up to the intake trick on many occasions, but not this time.

When to turn off circulation pump on Sundance spa?

Allison from November 1st to April 31st you should run the spa in Standard mode with the Circulation pump set to run 24hr duration. Between May and November depending on the ambient air temperature you may experience overheat of the water especially in July and August.

How long does a Sundance Spa hot tub last?

The hot tub is programmed with a default setting starting at 12:00 AM and lasting for 8 hours, but this can be changed. This cycle addition to the normal operation. filter cycle. For example, the primary filter cycle is set to 8 hours every water after the cycle has finished. The next primary filter cycle will only be for 6 hours not 8 hours.

Why does my hottub pump turn on and off?

By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them. only to do it again… Submitted: 10 years ago. Category: Pool and Spa Experience: Servicing pools and all brands of spas for over 28 years. poolguy810 : Hello, how can I help you today?

What to do if you have an airlock on your Sundance spa?

Remove your filter and stick the garden hose in that hole with a rag wrapped around it to force water into that line and hopefully alleviate a potential airlock. Alternatively you could locate the suction line where it is attached to the circulation pump, loosen the gear clamp and the hose and bleed the airlock from there.

What should I do if my pool is leaking under my deck?

Sophisticated sonar equipment is used by Aquaman Leak Detection to find and fix a swimming pool leak from plumbing lines under the decking. The entire deck does not have to be torn up to repair a return line leak. Suction lines that carry water to the filter, heater and chlorinator must be check for leaks.

What causes a pool to leak from the ground?

Top Causes of In-Ground Pool Leaks 1 Pumps and motor problems can cause a swimming pool leak. 2 General wear and tear on the pool surface can cause leaks. 3 Broken plumbing beneath the pool deck can saturate the ground. 4 Loose fittings on railings, tiles and other accessories lead to leaks.

Is it normal for a hot tub to leak?

Leslie’s is proud to partner with Hot Tub Works to bring you this helpful content on lesliespool.com. A leaking spa or hot tub is cause for alarm. But don’t freak out! It’s almost never the spa shell, and in most cases, spa leaks can be found and fixed easily.

Why is water coming out of my spa?

If the original PVC glue was thin in one area, over time water can seep out between the pipe and fitting walls. Locating a Spa Plumbing Leak: If you don’t see the spa leaking anywhere inside of the equipment bay, then you have a real spa plumbing leak.

Is it normal to have a leak in your pool?

Eventually, your pool will need maintenance. It’s an unavoidable truth with most things in life. If you find yourself adding more than a quarter-inch of water per day or more than two inches of water per week, you may have a leak. What may help is knowing what the 5 common causes of pool leaks are.

How do you fix a leaking spa light?

Shine your flashlight onto the area around the housing to determine if water is leaking from the spa light. The fix for a leaking spa light is usually a new spa light kit, or the locknut could just be loose.

Why is my air pump running but no bubbles?

Just stopped putting air in. the hose is fine, it’s running . Put it all together and no bubbles come put out. I can blow into the hole on the side and air goes through. No pressure. Tried sealing it better with a gromit thingy, didn’t help. Do I really have to buy a whole new pump? It was all a part of a little 1 gallon set.

What kind of noises do hot tubs make?

Spa & Hot Tub Noises 1 Vibration Noise on Spas. Vibration noise coming from a hot tub is all too common, and the source of much friction between neighbors. 2 Clicking. A spa or hot tub that makes a clicking sound may be working just fine, but if the pump won’t turn on high speed, and all you hear is 3 Squealing. 4 Humming.

Why does my spa make a humming noise?

Sometimes the humming noise precedes the popping of the circuit breaker. Another usual source for a spa humming noise is vibration – either of the sub-floor beneath the spa, or the equipment housed beneath the spa.