How can I rebuild my COMPOOL cva-24t actuator?
You’d simply swap out what you have with a new actuator and plug the wire into your automation panel. Easy enough if you wish to do that. Then you could buy the switches and rebuild what you have as a spare. These actuators are actually fairly easy to rebuild in the field.
What is the actuator number on a pool Valve?
The actuator says “CVA-24”. I’ve searched the forum and it seems that many of the repair parts are obsolete, which surprised me considering the pool isn’t that old. The actual valve has “Compool” on the housing cover. The valve it controls is a 3-way valve oriented 180°, so I believe the actual part number is a “CVA24T”
Why is my Pentair COMPOOL cva-24t valve stuck?
So, I turned the CVA-24T toggle switch opposite to ON1 and then turned it back to ON2. It’s stuck at about 25 degrees. Not sure what that tells me except something is not working in the system. Not sure if this test confirms it is these digikeys or cams.
What to do if your cva-24t valve fails?
Use a multimeter to check the voltage to the actuator. If there is no power to the actuator, check the 24V power source. If you do see power to the actuator, the motor or the switches in your actuator may have failed and will have to be replaced. I would also try this, swap the port inside your controller with another one of your valves.
How does the Pentair COMPOOL valve actuator work?
This 180-degree valve actuator is designed to use with 3-port Compool, Ortega and Jandy pool and spa valves. It works to prevent dead-heading of pumps. The built-in corrosion-proof enclosure will keep your pool or spa working hard with no interruptions. Included is a 3-wire, 25-foot cable, and 24-VAC.
Is the COMPOOL valve actuator compatible with Jandy and Hayward?
Compatible with all 24VAC Control Systems including Jandy & Hayward/Goldline Includes 25 ft. cable, Service switch (for flow direction) Operates Compool, Ortega or Jandy Valves. ETL recognized & UL listed for use with IntelliTouch Needed an extra actuator to control water to our water feature and Pool Supply had the model I was looking for.
What kind of valve actuator do I need for my Pool?
Pentair CVA-24T Valve Actuator 24V for 3-way Valve; after opening my pool this year the valve doesn’t seem to be closing completely leave a small trickle. How can I troubleshoot this? Remove the cover of the valve to expose the internal mechanism, adjust the position of the cam so the valve can move in a further direction to close completely.
Is the COMPOOL cva-24 a bad limit switch?
(Compool CVA-24 bad limit switch). If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
