How big is the Fluidmaster Pro 45 valve?
The Fluidmaster Pro 45 valve is an anti-siphon, adjustable toilet fill valve. The valve can be adjusted from nine to 14 inches long. The Pro 45 has two adjustments.
What are some common problems with Fluidmaster toilets?
Some common problems with Fluidmaster toilets include the toilet fill valve running nonstop. Another problem is the water failing to fill up the tank after flushing. Other problems include ghost flushing, the toilet flapper failing to seal completely and water leaks.
Where is the water supply valve on a Fluidmaster toilet?
The Pro 45 can be used to replace most other float valves on most toilets. Turn the toilet water supply valve, which is normally located on the left side of the toilet under the tank. Pull the lid off of the tank, and set it in a safe location, so it does not break.
How do you replace a valve on a pro 45?
Insert the shank of the Pro 45 into the hole where the old valve came out, and check the length. Find the line at the at the top of the float, and adjust it to one inch above the overflow tube. Adjust the valve by holding the top part of the valve and turning the bottom of the shank.
Some common problems with Fluidmaster toilets include the toilet fill valve running nonstop. Another problem is the water failing to fill up the tank after flushing. Other problems include ghost flushing, the toilet flapper failing to seal completely and water leaks.
What should I do if my Fluidmaster fill valve is not working?
Turn the feeder valve back off, replace the cover and turn the valve back on. Replace the inner rubber seal if water flow problems persist after flushing. Get a Fluidmaster No. 242 Replacement Seal from any hardware store. Turn off the feeder valve and remove the Fluidmaster cover.
Where is the refill tube on a Fluidmaster toilet?
Essentially, by using standard Fluidmaster replacement parts, a Fluidmaster unit will last the lifetime of your toilet. Check the black vinyl refill tube that attaches to the Fluidmaster unit near the top. If it is hanging loosely into the overflow pipe, it may act as a siphon and drain water from the tank back down into the valve.
How does a Fluidmaster float and fill unit work?
Troubleshoot your Fluidmaster, and make your toilet work like new! A Fluidmaster self contained float and fill assembly unit is the modern version of the old toilet fill tube, with separate float and ball assembly. Fluidmaster has combined the fill and float portions inside of your toilet tank to create a one piece unit.
