How accurate is the Hawkeye thermometer?
±0.4°F
It measures between 91.4° to 109.4°F (33° to 43°C), with an accuracy of ±0.4°F (±0.2°C). The thermometer has a large, easy to read color changing LCD screen display with a Fahrenheit or Celsius readout.
How do I turn off my Viking hot tub?
Press the “Jets” button once to activate the low speed of the pump and again for the high speed. Press the “Jets” button again to turn off the pump. If left running, the low speed of the pump will automatically turn off after 4 hours, and the high speed will automatically turn off after 15 minutes.
How do you use a Hawkeye thermometer?
Simply hold the thermometer 0.4 in. to 1.1 in. from center of forehead (10 mm to 30 mm) and press the trigger. The temperature displays quickly with a response time of less than 2-seconds. It measures between 91.4° to 109.4°F (33° to 43°C), with an accuracy of ±0.4°F (plus/minus 0.2°C).
How do you change a Hawkeye thermometer from Celsius to Fahrenheit?
Hi shay shay, to change to Fahrenheit or Celsius first switch off the thermometer. Whilst it is off press and hold the button for 3-5 seconds until you see F in the LCD screen. It will now read in Fahrenheit.
How do you calibrate a general infrared thermometer?
How to calibrate an IR thermometer>
- Place the Fluke 4180 non-contact infrared calibrator in a location that is free of drafts.
- Set the 4180 to 37 °C (98.6 °F) and set the 4180 apparent emissivity setting to 0.98, the emissivity of skin, which also should be the emissivity of the DUT (device under test) thermometer.
How do I change my temperature gun from Celsius to Fahrenheit?
Step 1: Make sure the thermometer is off. Step 2: Press and hold the power button, and after about 5-7 seconds, the display screen will come back in turn: “℃/SET, ℉/SET”. Step 3: Release the power button as soon as the desired temperature unit appears on the display screen.
How do you change a non contact infrared thermometer from Celsius to Fahrenheit?
Convert units from Celsius (C) to Fahrenheit (F) 1) With two AAA batteries properly installed, pull the purple trigger to turn on the non-contact thermometer. 2) Hold down the SET button until F-1 appears (about 2-3 seconds). F-1 will display briefly and will then change to a number.
