Does the brand of toilet seat matter?
Answer: No. Per North American plumbing standards, all toilet bowls and seats are either round or elongated (aka oval or oblong), regardless of brand. With very few exceptions, all round seats fit round toilets and elongated seats fit elongated toilet bowls.
Why are toilet seats split in the front?
The code is followed by most public authorities, many public toilets feature open front toilet seats (also called “split seats”). The purpose for this seat design is to prevent genitals contacting the seat. It also omits an area of the seat that could be contaminated with urine, and avoids contact for easier wiping.
How can I tell what kind of toilet seat I Need?
To find out which toilet seat you need, measure the length of the bowl. Find the center between the seat bolts and measure to the outside edge of the front of the bowl. An elongated bowl will measure between 18 and 18.5 inches, while a round bowl will measure about 16.5 inches.
Do you have to have open front toilet seats?
All seats of water closets provided for public use shall be of the open-front type.” The global industry guideline Uniform Plumbing Code — created by the International Association of Plumbing and Mechanical Officials (IAPMO) — superceded the ASNPC, and has since 1973 called for open-front toilet seats.
How are toilet seats secured to the bowl?
Original assignee: C.F. Chureh Manufacturing Co. It is customary to mount toilet seats and toilet seat covers on toilet bowls by means of hinges which, in the more modern type of construction, are usually secured to the bowl by means of threaded members which pass through vertical apertures in the bowl.
How big of a bolt do you need to replace a toilet seat?
When replacing a toilet seat, in addition to check for standard hinge bolt spacing on the toilet base (5 1/2″ or 155mm). If your toilet seat bolt spread is other than 5 1/2″ (155mm) you can still find a seat whose bolts will fit, either from a toilet supplier or from plumbing suppliers.
What kind of toilet seat do I Need?
The PureSpa, FreshSpa, SimpleSpa, and SouthSpa lines of bidet attachments fit nearly all standard Round and Elongated toilet bowls, including most one-piece and curved toilet fixtures (commonly referred to as French Curve). Refer to the fit diagram below for exact specifications for fitting the bidet attachment to your fixture.
Do you need a ruler to measure a toilet seat?
These instructions are for fitting a Swash bidet toilet seat onto an existing toilet. To measure a toilet seat, you’ll need a tape measure or ruler and you may need to remove your existing toilet seat in order to get the most accurate measurements.
Can a toilet manufacturer use an existing part?
When the toilet manufacturer chooses to use an existing part, the manufacturer of the part can still sell that piece under their own name – these are considered “will fit” parts. If the toilet manufacturer chooses to spec something for the specific toilet, the part manufacturer can then only provide that part to the toilet manufacturer.
How many employees do you need to have a toilet?
The more employees you have, the more toilets are required. These numbers vary depending on the type of facility. The Restroom American Association, for instance, requires factories and industrial buildings to have at least one water closet for every 100 workers.
