Does Pentair IntelliFlo have freeze protection?
The IntelliFlo® Variable Speed pump out performs all conventional pumps in its class. The pump control panel alarm LED and error messages warn the user against under and over voltage, high temperature, over current and freeze protection with user defined minimum and maximum speed presets.
What happens if a pool pump freezes?
Bring the pump housing into an area where the temperature is above freezing. Eventually, the ice in the pump melts and the pump can be flushed, winterized and reconnected back into the filtration lines of the pool.
Do you run pool pump during freeze?
Keep your pumps running at all times during freezing temperatures. Remove winterizing plugs from the pump, filter, heater and any other equipment that can be drained. Install a Freeze Protector, which is a device that circulates the pool water when temperatures are 38°F or below.
Is there freeze protection on Pentair easy touch pool?
Yes, the 4 x 160 VS does have internal freeze protection. This, from the Owner’s Manual: self on to generate internal heat when the air temperature drops below 40° F.
What should the temperature be for Pentair easy touch?
Our Pentair Easy Touch System is kicking on the pump at an air temperature of about 36° for “freeze protection”. This is really frustrating and a big waste of money having the pump run all night (and sometimes all day) until the temperature rises.
Can a Pentair pump run faster with easytouch?
You can certainly run at a faster speed if you want and not run as long. With your EasyTouch you can schedule the pump to run faster for an hour or two and then slow down again. I would experiment with different pump speeds to see if they make any significant difference in skimming.
Can a Pentair pool pump freeze in minutes?
It would seem rather damaging for a pump to cycle on/off every minute for hours/days at sub freezing temps. Besides, if it’s cold enough to freeze water in minutes the pool equipment should already be drained. You can set your air temp on the console to any value you want, But the 4×160 pump will run under a freeze condition anyways.
Yes, the 4 x 160 VS does have internal freeze protection. This, from the Owner’s Manual: self on to generate internal heat when the air temperature drops below 40° F.
Our Pentair Easy Touch System is kicking on the pump at an air temperature of about 36° for “freeze protection”. This is really frustrating and a big waste of money having the pump run all night (and sometimes all day) until the temperature rises.
Do you need an easytouch pool control system?
EasyTouch systems are available for spa, pool, or a pool/spa combination with shared equipment. And, you can select from systems that control four or eight accessory functions. EasyTouch makes it easy to schedule and operate pool and spa cycles, and optional controllers are available for added convenience.
It would seem rather damaging for a pump to cycle on/off every minute for hours/days at sub freezing temps. Besides, if it’s cold enough to freeze water in minutes the pool equipment should already be drained. You can set your air temp on the console to any value you want, But the 4×160 pump will run under a freeze condition anyways.
