Do you turn the Jandy never Lube valve on or off?
Then on the return side or the Jandy Never Lube valve after the heater you’ll have the off facing mostly the spa returns, NOT all the way. The reason you do not turn it all the way off is so that you will get chemicals/chlorine into your spa to sanitize it.
What does a Jandy pool diverter valve do?
Jandy diverter pool valves divert water and are available with two or three ports. A 2-port valve essentially acts as a 1-way-in / 1-way-out valve, allowing for water flow to be shut off completely or to restrict the flow of water for a lower flow rate. A 3-port valve provides more flexibility with one in-port…
How to turn on a hot tub / spa with the valves?
The last thing to remember is after going into your spa turn your valves back to where they were prior to turning on your spa/hot tub. 100% spa suction off and 80% pool to 20% spa return side. If you can imagine what the pump is doing and taking water from it is very easy for you, the homeowner, to not get confused by this process!
Where does the water go in a Jandy hottub?
The water is directed into your filter usually with us a Clean and Clear 520. Once the water goes through the filter it is directed through your heater. After the heater there will be another Jandy Never Lube valve with one pipe on each side.
Then on the return side or the Jandy Never Lube valve after the heater you’ll have the off facing mostly the spa returns, NOT all the way. The reason you do not turn it all the way off is so that you will get chemicals/chlorine into your spa to sanitize it.
The water is directed into your filter usually with us a Clean and Clear 520. Once the water goes through the filter it is directed through your heater. After the heater there will be another Jandy Never Lube valve with one pipe on each side.
Why do you not turn off the hot tub?
The reason you do not turn it all the way off is so that you will get chemicals/chlorine into your spa to sanitize it. So say it is cracked open, out of the heater it goes to the Jandy Never Lube valve and say 80% of the clean water will go to the pool and 20% will go to the hot tub/spa.
The last thing to remember is after going into your spa turn your valves back to where they were prior to turning on your spa/hot tub. 100% spa suction off and 80% pool to 20% spa return side. If you can imagine what the pump is doing and taking water from it is very easy for you, the homeowner, to not get confused by this process!
How do I put my pool heater in Spa mode?
On the heater itself is the control panel and from there you can turn the heater on and set it for pool or spa mode. Once the pool pump is on you can then set the heater to the desired temperature and turn it on. If you are going to heat an attached spa, you will have to turn the valves to spa mode.
Where is the off valve on a Jandy pool pump?
The majority of pools use Jandy valves, notice that the small handle part is the “on” position and the large flared part marked “off” is the off position. The suction line valve is located right in front of the pool pump. Turn this valve handle completely to the opposite direction.
How to avoid cancelling your YouTube pool channel?
To avoid this, cancel and sign in to YouTube on your computer. Welcome to the #1 Swimming Pool Channel on YouTube! I have over 900 videos that cover every aspect of the swimming pool industry. I am a Pool Service Professional with over 25 years of practical experience.
