Do you take the skimmer basket out when vacuuming?
You need to leave the skimmer basket in under the skim vac plate, this allows the skimmer basket to catch your debris, and you can empty it quickly without having to turn your pump off and on like you would without it.
What happens when you vacuum a pool on waste?
When you vacuum using the waste setting the pool water will be expelled, without returning to the pool, so the pool level will drop. You should top the pool up before you begin, leave a hose running and vacuum quickly.
When should I vacuum to waste?
You’ll also need to vacuum to waste when there is a large amount of debris or leaves in the pool, usually at opening. Vacuuming to WASTE can only be accomplished if a multiport valve controls your pool filter system. This position bypasses the filter and sends all the unwanted debris through the waste line.
Do you vacuum to waste or backwash pool filter?
Use the filter setting, or you can vacuum to waste, which means the water is discharged out instead of returning to the pool. Using the filter setting will save water, but you have to backwash the filter when you are done. Vacuum to waste when you have a lot of debris in the pool that you don’t want going into your filter.
What should the waste valve be on a pool vacuum?
That is the setting we use on our normal weekly cleaning vacuum jobs. However, when vacuuming a pool that has just had it’s mesh safety cover removed and is covered with a layer of fine dust, the multi-port valve setting should be “Waste”. This also applies to a pool covered with algae or lots of dirt.
How do you remove a vacuum from a pool?
Rotate the lever on the filter multiport valve to the “Waste” setting. Turn the pool circulation pump on. Close the pool main drain valve and the valves leading to any skimmers other than the one you will utilize for the pool vacuum source.
When to discontinue vacuuming a swimming pool?
Discontinue vacuuming if the pool water level drops below the bottom of the skimmer you are using as a vacuum port. Continued vacuuming may suck air into the system requiring the pump to be primed and air purged from the filter and lines. Turn off the circulation pump. Unplug the vacuum hose from the skimmer port, and remove it from the pool.
Why do I need to vacuum my Pool to waste?
If you try to vacuum a very dirty pool using the more usual Filter setting then it is likely that the filter will become clogged and may even start to allow dust particles and other debris through which will then end up back in the pool. The other reason you may need to vacuum to waste might be if you have a heavy infestation of algae.
Do you remove skimmer basket while vacuuming pool?
Next, attach the vacuum system to the skimmer inlet powered by the circulation pump of the pool. Now, here answers the question earlier: do you leave skimmer basket in when vacuuming pool? YES, you need to remove the skimmer or strainer basket before attaching the open end of the hose to the inlet.
Can a pool be vacuumed to remove algae?
Algae particles can be too small to be caught by the sand or other filter medium so if vacuumed on the filter setting they will probably just end up being redeposited back into the pool. So in this situation vacuuming to waste is the best solution to remove the algae from the pool.
Is there a way to filter to waste in a pool?
There sometimes no waste setting on a cartridge filter, at least in a Hayward system, so you cannot filter to waste. However it is possible to fit a Hayward 3 way valve to bypass the filter and if you do that you will then have the facility to vacuum to waste. These are the pool cleaning tools I have found the most useful since I have had my pool.
