Do you shock or balance pool first?

Step 4 – Shock the Pool! Equally important is to balance the water first, before shocking a pool. Minerals, metals and dirt often mix and deposit as stains or scale during shocking, when pool water is not balanced. In addition, chlorine has much more power or efficacy at lower pH levels, so you can use less.

How long does it take to balance pool chemicals?

If you add chemicals to balance the water after testing, wait a full day – or even longer – before retesting. It takes about 24 hours for the chemicals to properly circulate in order to get an effective reading from the retest. The water test will assess the pH, chlorine, total alkalinity and calcium hardness.

Will shocking your pool lower pH?

Does pH go up after shocking pool? Chlorine based pool shock (Calcium Hypochlorite) has a high pH, and will naturally raise the pH level of your swimming pool water, in addition to changing your chlorine level. Chlorine free shock has a neutral pH, and will not affect any of your pool chemical levels.

What to do after adding water to pool?

What Do You Do After an Above Ground Pool Is Filled With Water?

Step 1: Learn about how to prevent drowning and pool chemical injuries.
Step 2: Turn on the filter.
Step 3: Vacuum and skim off debris.
Step 4: Test the water, and then test it again.
Step 5: Enjoy your pool, but safely!

Can I put shock and algaecide in at the same time?

While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.

How to shock your pool to balance the water?

To shock your pool, follow these steps: 1 Fill a 5 gal bucket with warm water 2 Slowly mix in one pound (bag) of pool shock 3 Use a stick to stir the bucket and dissolve the shock 4 Gradually pour the mixed bucket of shock water into the pool Pour most of it from the deep end so that it reaches your main drain faster

How can I tell if I need to shock my Pool?

If the pool is covered, the gas will hit the cover and fall back into the pool, causing an even larger chloramine level. If you aren’t sure if you need to shock, the easiest way to find out is to test the water. Most test strips or test kits show Free and Total Chlorine. Total Chlorine is the total amount of chlorine in the water.

When to use shock treatment on a pool?

You’ll also want to apply shock treatment when opening the pool, and closing it down for the season. On opening, after you’ve balanced it’s pH level, shocking will sanitize and oxidize the pool, restoring its clear water. On closing, pool shock is used as a disinfectant to prepare the pool for the winter months.

How does pool water balance affect pool quality?

Other pool chemicals also must be balanced and in a certain “safe area” – an ideal range for each component of water balance that is tested. Pool water quality is affected by the level of pH, which is affected by Alkalinity.

Is it safe to shock a pool with chlorine?

Shocking a pool elevates the free chlorine level to 5-10 ppm. Elevated levels of free chlorine break up combined chlorine. Once your pool has been shocked, the water will be clean, clear, and safe for your family to enjoy.