Do you need planning permission for a macerator toilet?
Planning permission isn’t needed, but when you fit your Saniflo or other macerator system it will have to conform to Building Regulations. A professional builder or plumber should be up to date with these. The system also allows you to pump waste upwards into the sewers.
Why does my macerator toilet smell?
Bad smells can be due to a build-up of limescale and human waste in the 2-3 inches of water that’s always left in the Saniflo. To see if it’s your Sanilfo that’s emitting the bad smell, flush your toilet or fill your basin with water and then unplug it.
What to do if your Macerator toilet is blocked?
If the macerator pump is blocked then the motor will need to be removed from the toilet. It will then need to be turned upside down so the pump impellers are visible. Just like with the macerator, pliers will be used, and the engineer will clear the waste. The motor will then be put back into the macerator toilet.
Can a licensed plumber install a macerating toilet?
If you hired a experienced licensed plumber he will know that you should not install a macerating toilet in your home. Plumbing codes have developed over the years and in many states macerating toilets are widely accepted but in Illinois especially in cook county we hold the most stringent building codes in the nation.
What to do if your Macerator is running but not pumping waste?
If the macerator is running but is not pumping the waste away, then it is possible that the waste pipes are frozen. In just the same way that central heating systems pipes can become frozen so can those of the macerator. The service engineer will first turn off the macerator and if the waste has overflowed then they will remove it.
How do you install a toilet in a basement?
Press and twist into place, and use a metal band and washers to secure the toilet’s pipe. If you are concealing the macerator/pump, then use an accordion fitting to elongate distance from the toilet to the pump.
Can a macerating toilet be installed in a basement?
Be it a basement-turned-bedroom or a workshop toilet outside the house, macerating units can be installed in a number of situations, provided they’re located within range of the main drain.
How big does a macerating toilet pump need to be?
That range is dictated by the power of the pump, and varies between models – usually it’s somewhere between 10-15 feet of vertical lift and 100-150 feet of horizontal run. Many units have additional inlets to hook up a sink (kitchen sinks are not recommended), shower, or tub.
Where does the waste go in a macerating toilet?
Macerating toilets (aka “upflush toilets”), on the other hand, send waste to a macerating unit located behind the toilet or in the wall. High-powered blades liquefy the waste, which is then pumped out of the unit through normal pipe that’s been tied into the main drain line.
Where does the grinder go in a macerating toilet?
The grinder pump sits in a sump pit basin and sends liquefied waste off to the main drain. Be it a basement-turned-bedroom or a workshop toilet outside the house, macerating units can be installed in a number of situations, provided they’re located within range of the main drain.
