Do you need a barrier for tiger river spa?
Your Tiger River spa is equipped with a locking cover that meets the ASTM F1346-91 Standard for Safety Covers and as a result, is usually exempt from most barrier requirements.
What happens when the suction line is left open?
If left uncompensated, this will result in a gravity-driven flow through the pump even when the pump is not in operation as soon as a flow path through the system is opened. This phenomenon is known as over-dosing. Different pump types react differently to this situation.
What to do if your shark vacuum has suction problem?
Shark vacuum suction problem quick tips. At first, unplug your vacuum. Empty the dust cup and clear its dirt and debris. Remove the filters and clean filters with water. Check the airflow of your vacuum hose, end of the handle and the front of the wand. Check brush roll for dirt or debris.
Who is the owner of tiger river spa?
If you have any questions about any aspect of your spa’s set-up, operation or maintenance, contact your authorized Tiger River dealership. They are trained professionals who are familiar with the product as well as new spa ownership concerns. Their expertise will facilitate the enjoyment of your new Tiger River spa.
What are the controls on tiger river spa?
All Tiger River spas came with an electronic control panel for adjusting the temperature of the water, the strength of the jets and other variables. You can lock the control panel of your Tiger River spa to prevent accidental input during bathing or lock the position of the jets. You can also lock the water temperature control separately.
What does the check valve on Tiger River hot spring do?
This check valve’s function is to “open” when someone puts their hand over the jet pumps suction fitting within the filter intake. This check valve will “open” drawing air into it from the equipment compartment, thereby stopping suction of the jet pump. This safety device is found on all 1993-2002 Hot Spot and all 1992-1999 Tiger River spas.
What causes a suction sensor failure alarm on tigerflow?
For both a Suction Sensor Failure alarm and a System Sensor Failure alarm the potential causes could include: If the issue is not due to wiring, contact TIGERFLOW to replace a malfunctioning pressure sensor.
Is the automatic water shut off system foolproof?
These automatic water shut-off systems are foolproof because they are designed to stop a leak or overflow before it gets worse. Most plumbing issues go unnoticed until there are visible signs, and by then it’s too late.
