Can you replace a pilot on a water heater?
If your hot water heater suddenly stops working, chances are a bad thermocouple has shut off the gas to the pilot light. Replacement is an easy DIY repair.
Can a pilot light be replaced on a gas water heater?
If this is the problem, in most cases, it’s easily resolvable with the above steps. If your gas water heater has a closed burner chamber or doesn’t have a pilot light, it’s much more difficult to access. To do this replacement, you most likely need a professional to fix this type of thermocouple.
What should I do if my pilot light goes out?
If a pilot light goes out, you can relight it with a match, using the proper precautions. Related Articles. On some gas-powered appliances — such as gas ranges, water heaters, boilers and gas fireplaces — the pilot light works to ignite the main flame when the gas is switched on to the burner by the regulating valve.
Do you need to light your water heater with a match?
Click here → Some old water heaters will need to be lit with a match. The only real caution is if you are smelling gas. If so, don’t light it! You need to let the gas clear out. If it’s a constant gas leak, call a service guy for help. Loading…
Why is my gas water heater pilot light yellow?
Also, some homeowners reported that while they were cleaning the unit, a small orifice cap found on top of the pilot tube fell out making the pilot light unstable, yellow and very high. If the gas pressure is too low, the flame can become too small. Check with the utility company about this problem.
If this is the problem, in most cases, it’s easily resolvable with the above steps. If your gas water heater has a closed burner chamber or doesn’t have a pilot light, it’s much more difficult to access. To do this replacement, you most likely need a professional to fix this type of thermocouple.
What’s the best way to light a water heater?
While still holding the gas down, light that pilot. Some water heaters have a red or black igniting button, and others need to be lit manually with a long lighter. When the flame ignites, continue to hold the gas knob or button down for a full minute. Then release it slowly, and make sure the light is still lit.
What should the pilot flame be on a propane tank?
Important: Before troubleshooting the pilot light, keep in mind that a pilot flame is always ON and the flame should be blue. If it is yellow, it needs an adjustment. Make sure that the tank is completely filled with water before lighting the pilot light.
Also, some homeowners reported that while they were cleaning the unit, a small orifice cap found on top of the pilot tube fell out making the pilot light unstable, yellow and very high. If the gas pressure is too low, the flame can become too small. Check with the utility company about this problem.
