Can you move a floor drain?
One of the most costly jobs that you might run into is relocating a floor drain and waste pipe. This involves digging up part of the floor and rerouting the waste pipe to where it needs to be, so water can escape. A job like this is usually done when a floor drain is in the wrong position.
How do you install new drain line under concrete slab?
Next step is the new pipe running to the existing drain line, which is also under the concrete slab. 10. Turn on the shut-off valve. Make sure you do not have any leaks.
How can I move a toilet sewer drain in a concrete floor?
If you shove something down the pipe to block the gasses, make sure it does not go down the pipe. Also try to keep debris out of your drain. You don’t want to clog it up. You can use diamond tools to cut your way through the concrete.
How do you move plumbing under a slab?
Now, it is the time for plumbing work. Using a handsaw, cut your pipe, just beneath the trap. 7. Add a new fitting to the pipe. Seal the connection with soldering iron (metal pipes) or plumbing putty. 8. Attach the new piece of pipe to the fitting.
Where is the plumbing in a concrete slab?
The kitchen wall where the refrigerator was located backed up to the foyer at the front door of the house, and, sure enough, the pipe was a few inches outside the wall. Hey, but what’s 3 or 4 inches, unless it jumps over into the next room?
Next step is the new pipe running to the existing drain line, which is also under the concrete slab. 10. Turn on the shut-off valve. Make sure you do not have any leaks.
Where does a shower drain go in a concrete floor?
During the construction process plumbers lay out the drain system in dirt-covered trenches before the cement workers pour the concrete slab. This leaves the shower drain under the concrete slab. The drain system must slope from the shower, or other plumbing fixture, down to the home’s septic tank or sewer system.
If you shove something down the pipe to block the gasses, make sure it does not go down the pipe. Also try to keep debris out of your drain. You don’t want to clog it up. You can use diamond tools to cut your way through the concrete.
What do you need to move plumbing under concrete slab?
3. First, you need to remove the flooring (linoleum, carpet, hardwood or tiles). 4. No need to break the whole concrete slab only above the piping line. Use a jackhammer to break the concrete and then remove the pieces. 5. You have to turn off the valve for the fixture you are working on.
