Can I start my RV while plugged into shore power?
Yup! Just resist the urge to drive away…
How do you run shore power?
To operate shore power, you would connect your boat to a shore-side power source — typically a power pedestal. Furthermore, some boats have two unique lights — Green and Red — for power and reversed polarity, respectively. You do not want the red light on in case the dock power is incorrectly wired.
What happens to batteries when plugged in to shore power?
When plugged into shore power at the campground, presumably the AC to DC converter will charge the auxiliary battery bank. All the lamps, fans, water pump, etc., still operate on 12-volts DC, just that the DC electricity is provided by the converter instead of the batteries while plugged in.
What happens when there is no shore power?
“The converter is what provides all this power when shore power is available. When no AC power is available, the converter just acts as a fuse panel for the DC circuits and the battery provides all the DC power at 12-13 volts to run everything. The converter’s power supply does nothing when there’s no AC power coming in.
What happens when I plug my RV into shore power?
In other words, all your appliances that are powered by the DC power system will work via shore power. During this time, your battery can get some rest and relaxation before you power it back up when it’s time to get back on the road. Just like any type of battery, you can run the risk of not charging your RV battery enough or charging it too much.
Why do DC circuits still work when shore power is off?
So the same wires will provide power to the DC circuits when shore power is disconnected and receive power from the converter to charge the battery while connected to shore power. That also explains why the DC circuits still operate when the battery disconnect switch is set to off – the converter is powering the fuse panel for the DC circuits.
