Can a spa topside control work with a TV remote?
Topside controls will only work with a particular spa system control board (s). Another TV reference would be appropriate; you have to use the TV remote that is made for your make and model of television. It’s the same with spa topside controls, they only work with the spa control make and model for which they were designed.
How to troubleshoot a spa side control panel?
Spaside Control Panel Buttons Not Working Correctly 1 Check for moisture under glass or on contacts 2 Check cable for any rodent damage, crimping or melting 3 Clean plug-in cable connections at both ends 4 Membrane or touch pad buttons may be faulty 5 Inspect circuit board for damage and correct power output 6 Replace topside control
What happens when you turn off the cleverspa?
Each time you turn your CleverSpa® off, the water temperature will drop so always allow plenty of time for it to heat up before use. – When the temperature is reached, the heater and filter will stop, however the heater light will remain on.
How do I Turn Off the cleverspa water heater?
1. Firstly, turn off the CleverSpa® heater. 2. Make sure the drainage plug is in place on the floor of the CleverSpa®. 3. Open the water outlet on the outer wall of the CleverSpa® and screw on the inflation hose.
What to do if your remote control is not working?
Make sure the receiver is properly connected. The receiver is usually in the display board, a small circuit board on the front of the unit. If the remote control is working but not being received, the problem lies with the display board or the indoor control board.
How to troubleshoot an issue with your spa?
To troubleshoot an issue with your spa, locate your specific problem in the chart below to help determine a probable cause, and then apply the right solution. Do you need to call a professional technician? Do you need to call a professional technician? Adjust the total alkalinity and pH.
Where is the reset button on a remote control?
Look for a button on the front right side of the unit under the “lid”. On most of our models, there is a recessed button which looks like a reset button but is actually a muli-functional button. Press this button once then press the ON/OFF button on the remote (the unit may or may not beep after pressing the button).
When to contact an expert for a hot tub repair?
We recommend contacting an expert technician when repairs require professional attention, especially during the warranty period—you don’t want to risk voiding your warranty. Your Hot Spring hot tub offers incredible benefits for stress and tension relief, hydrotherapy, and personal connections.
