Can a schwintek be used to move a Winnebago?

IMHO poor installation and poor selection of the Schwintek to move heavy slides has caused problems for Winnebago and Thor. Schwinteks do fine when moving slides that smaller, like bedroom slides. They do poorly for the large kitchen and living room slides. Those are better moved by hydraulics or larger geared electric slides.

What kind of slide does a Winnebago have?

It would not retract evenly, ending up with one end sticking out about an inch. Parts were replaced, adjustments made, and all has been OK since. The service tech told us several times to be absolutely sure that the motorhome be accurately leveled before extending the slide. 2014 35′ Itasca Suncruiser 2013 Jeep Wrangler

Are there any issues with the Winnebago 2015 Tour?

Friends have a 2015 Tour and haven’t mentioned any issues with their slides. G-half can always find a way to do things upside-down, inside-out or backward. It’s his Super Power! Posted By: luvlabs on 09/22/15 04:15pm IMHO poor installation and poor selection of the Schwintek to move heavy slides has caused problems for Winnebago and Thor.

What was the problem with my Winnebago in wall?

Problem was it kept bringing the slide in tighter and tighter. At first it closed the gap between the counter top and island faucet. Then it started hitting the faucet, then it hit the faucet and began to move the island. The hydraulic slide on the other side has no issues.

Are there any problems with the Winnebago slide out?

But the most upsetting part is your Winnebago slide-out is having some issues you can’t figure out. So this kept you wondering how to solve Winnebago slide out problems?

How do you cut a slide out of a Winnebago?

First, unbox the slide-out ski. Now measure your slide’s outer side and cut the ski according to that size. Now open the sidebar of the slide. For that, you have to unscrew it and remove the tape inside. Now clean any remaining adhesive on the slide bar. It’s time to put the ski on the outer side of your slide.

How does a hydraulic slide work on a Winnebago?

At first it closed the gap between the counter top and island faucet. Then it started hitting the faucet, then it hit the faucet and began to move the island. The hydraulic slide on the other side has no issues. The mechanic says Lippert wants the whole system taken out and returned to them for R&D.

How big is a 1999 Winnebago motor home?

1999 Note Motorhomes Length Coach Design Floor Plan Self Cont. M-30A-Chevrolet (*) 30’6″ Motor Home (Class A) Center Kitchen Yes M-30A-Ford (*) 30’6″ Motor Home (Class A) Center Kitchen Yes M-32T-Chevrolet (*) 32′ Motor Home (Class A) Center Kitchen Yes

What makes a Winnebago a good travel trailer?

Spacious quality. Nimble reliability. Made for adventurers who want to share what the open road has to offer. Winnebago’s accessibility enhanced line makes adventure possible, and enjoyment a given. Experience the freedom of adventure with the innovative versatility of Winnebago’s travel trailer lineup. You can take it with you.

What do you need to know about the Winnebago line?

Winnebago’s accessibility enhanced line makes adventure possible, and enjoyment a given. Experience the freedom of adventure with the innovative versatility of Winnebago’s travel trailer lineup. You can take it with you.

What happens when you push the slide out button on an RV?

If your RV or motorhome doesn’t have the juice, your slide outs aren’t going to budge! If you push your slide-out button and nothing happens, double check to make sure that the path of the slide out is unobstructed.

What was the issue with the Wall Slide on my Winnebago?

We had an issue early in our first year with the full wall slide on our 2014 Itasca Suncruiser. It would not retract evenly, ending up with one end sticking out about an inch. Parts were replaced, adjustments made, and all has been OK since.

Are there any changes to the 2016 Winnebago?

The 2016 Winnebago’s have a new mechanism. The rails are no longer screwed to the slide. They are attached to the front and are flexible which has apparently ended the twisting in tests. I will see as I have a new one coming.

Why is my Winnebago slide not working properly?

The problem can be with the power gear. You have to reset it and keep pulling the handle until the sound fully stops. Or there might be dirt stuck inside the slide parts. If that’s the case, cleaning with soap and water will solve the issue. If not then add a ski to the slide bar so that water can do no harm.

Are there any problems with the schwintek slide out?

While here, It is alarming to see all the motorhomes here that are having problems with their slide outs that have the Schwintek In-Wall Slide-Out system by- Lippert Components, Inc. One has stated that their slides have failed 10 times in the last year and are threatening a lemon law suit, that is available in their state.

Why does my slide not retract after new motor?

After the new motor was installed, the slide still would not retract. The “square rods” connected to the motor were detached to assure the new motor was functioning. We found that power to the motor existed only when the “out” part of the slide’s in/out button was pushed. There was no power to the motor when the “in” side of the button was pushed.

Where is the slide out controller on a motorhome?

For my motorhome, there are two slide out controllers attached to the “roof” of the middle basement compartment between the two main beams of the frame. One controller for the passenger side slide-out and one for the drive side slide-out. RV Masters charged $130 for the new controller and $140 for an hour of labor to install the controller.

What kind of switch do I need for slide out?

Magnetic switches are very commonly used for the sensor circuits stop point. (They do not fail often) The setup should have 2 high current relays – one for the extend and one for the retract function. Is the bathroom wall between the slide in question? or some other space/wall at one end of the slide.

Where are the slide controllers on a coach?

Different coach but my slide controllers are behind a panel that holds my cable/sat input in one of the bays. I have electric motors also that look identical to yours. Mine are Kwikee but like stated all owned by Lippert now. On my motors there is a 3/4 inch nut and also on the motor is a “lock” switch.