Can A P-trap be replaced on a pedestal sink?
Replacing the drainpipe and P-trap connected to a pedestal sink requires the right tools and some planning. The drainpipe is connected directly to the underside of the pedestal sink, while the P-trap joins the drainpipe to the outlet pipe in the wall. In order to access the drainpipe and P-trap under the sink, the pedestal must be removed.
How do you replace a cracked pedestal sink?
Ask This Old House plumbing and heating expert Richard Trethewey helps a homeowner in Delaware replace his cracked pedestal sink. (See below for a shopping list, tools, and steps.) 1. Turn off the water supply to the sink. 2. Use an open-end wrench to loosen the nuts on the hot/cold water connections. 3. Use pliers to break the drainage connection.
Where is the P trap on a pedestal?
Designers generally create a U-shaped pedestal such that the front of the P-trap ends up hidden in a channel in the back of the pedestal. If you need to open the P-trap to clean it or replace it, you can gain access and then open the trap as you would under a regular sink.
How do you open P trap behind sink?
Loosen the second slip-nut where the P-trap meets the PVC waste pipe coming out of the wall. If you can’t turn the slip-nuts by hand, place a plumber’s wrench on the slip-nuts and turn them counterclockwise to loosen them. Place a bowl or bucket under the P trap to catch any overspill.
Replacing the drainpipe and P-trap connected to a pedestal sink requires the right tools and some planning. The drainpipe is connected directly to the underside of the pedestal sink, while the P-trap joins the drainpipe to the outlet pipe in the wall. In order to access the drainpipe and P-trap under the sink, the pedestal must be removed.
How do you replace a sink trap at Home Depot?
To make sizing the new drain pieces easier, keep the old drain parts for now. For the kitchen: Put the tailpiece washer into the flared end of the tailpiece, then attach the tailpiece by screwing the slip nut onto the sink strainer.
How do you remove a drain pipe from a pedestal sink?
Remove the mounting screws from the base of the pedestal using a power drill equipped with a screwdriver bit. Carefully slide the pedestal along the floor away from the wall so there is enough room to access the drain pipe. Loosen the nut that connects the sink stopper to the back of the drainpipe with a pair of channel-lock pliers.
How is a pedestal sink attached to the wall?
A pedestal sink is basically a version of a wall-hung lavatory in that the sink is attached to the wall studs and doesn’t need the pedestal for support. When a plumber installs the sink, it gets fastened to the wall and the pedestal goes in only after all the plumbing has been completed.
