Can a leaky shower diverter cause further damage?
However, there are a few mistakes that are relatively common and that can actually lead to further damage or problems with leaky showers. Learn to avoid some of those errors by reading on. Failing to turn off the water supply to the leaky shower diverter can cause problems for you while you’re making adjustments to the valve.
Why is my multiport valve leaking from under the handle?
Under the handle, on the stem of the diverter there are gaskets at the base of the spring that are meant to prevent such a leak. If your valve is leaking from under the handle the gaskets and/or spring are likely worn, or they are out of alignment.
What causes water to seep out of the diverter?
If the gasket has become worn and warped then the water will seep through the seam and end up in the waste. The Fix: The solution is pretty simple, replace the gasket. Some gasket replacements are simple, remove the valve cover and old gasket, then lube in a new one. Other gaskets are glued into the diverter which requires a few extra steps.
Why does my waste port leak when I spin the selector handle?
That tension we feel when spinning the selector handle is created by the diverter spring. the diverter against the spider gasket. If the spring in your valve is worn, it may be causing a seam between the diverter and gasket which shows itself in the form of a leak out the waste port.
However, there are a few mistakes that are relatively common and that can actually lead to further damage or problems with leaky showers. Learn to avoid some of those errors by reading on. Failing to turn off the water supply to the leaky shower diverter can cause problems for you while you’re making adjustments to the valve.
Under the handle, on the stem of the diverter there are gaskets at the base of the spring that are meant to prevent such a leak. If your valve is leaking from under the handle the gaskets and/or spring are likely worn, or they are out of alignment.
If the gasket has become worn and warped then the water will seep through the seam and end up in the waste. The Fix: The solution is pretty simple, replace the gasket. Some gasket replacements are simple, remove the valve cover and old gasket, then lube in a new one. Other gaskets are glued into the diverter which requires a few extra steps.
That tension we feel when spinning the selector handle is created by the diverter spring. the diverter against the spider gasket. If the spring in your valve is worn, it may be causing a seam between the diverter and gasket which shows itself in the form of a leak out the waste port.
