Can a jetsetter be used in a hot spring spa?

The Jetsetter is a Hot Spring Spa that sits three very comfortably. You can find Replacement hot tub covers for all Hot Spring Spas models here. “Summer Logic” occurs when the actual water temp for the spa climbs to 2°F (1°C) above set temperatures and is more likely in extremely hot weather.

What are the models of Watkins Wavemaster jet pumps?

This generic version of the Wavemaster® 9200 jet pump for the 2005-2006 Hot Spring Accolade, 2004-2007 Hot Spring Vista and the 2005-current Bengal HP (MM model), 2005-2007 Tiger River Caspian and one of the two pumps on the 2004 Siberian spa model. Also one of two pump models found on all Limelight Pulse spa models.

Can a Watkins hot spring spa pump be replaced?

Watkins specifies modifications for their Hot Spring spa pumps to accommodate the plumbing configurations, voltage and amperage draw of each of their spa models. You can be sure that a Watkins replacement pump won’t harm your spa’s plumbing (too much back pressure creates internal leaks) or over draw power (toast your spa’s control circuits).

What was the first Wavemaster jet pump used on a spa?

The 36070 was the first version of the Wavemaster® 7000 jet pump. This was the first 2″ suction and discharge pump used on any Hot Spring model. This pump was used on the Hot Spring 1993-1995 Classic, 1993-1995 Grandee and Sovereign spa models. Click on the “More Info” button for details.

Why is the jetsetter our highest rated hot spring spa?

Hot Spring Spas also packs the most sophisticated technology into every model. The Jetsetter’s high-end features ensure users feel pampered. 22 jets target neck, back, shoulders and calves.

What do you need to replace Watkins hot tub?

Determine if you need any extra or accessory pieces that go with the parts you are replacing. It can be helpful to change out things like plugs, fuses, or hoses if you are replacing control panels or jets. What about buying used Watkins spa and hot tub parts?

What kind of water does the jetsetter have?

Several decades of clean water research has brought Jetsetter users clean, soft, natural-smelling water that is a joy to soak in. The FreshWater ® Salt System is available on all Highlife spas, including the Jetsetter.

How to see the Jetsetter in real time?

Visit the Jetsetter page and check out the 360 degree photography for a tour of the product. Spin the spa to see all angles, and click to mix and match cabinet and shell colors in real time. Just how does a Monterey Gray cabinet look with a Platinum shell?

Why does my hotspring Jetsetter light keep flashing?

This spa is a HotSpring Jetsetter (model J). I replaced the water but I forgot to flip the circuit breaker and since I replaced the water, the Power & Heat light is flashing. I ran a garden hose down the filter down pipe, thinking that there might be a air bubble.

Where can I find the hot spring owner’s manual?

Please keep this manual available for reference. If you have any questions about any aspect of your spa’s set-up, operation or maintenance, contact your authorized Hot Spring dealership. They are trained professionals who are familiar with the product as well as new spa ownership concerns.

How to hook up a hot springs relay?

Hot Springs Relay Hot Tub Electrical Wire Hookup – YouTube how to connect the 3 electrical wires and the ground to the control panel of the Hot Springs Relay Hot Tub model Circa 2013.

How many jets are in a jetsetter hot tub?

JETSETTER JET SYSTEM. The Jetsetter Jet System offers an incredible 14 jets that relieve-tension in targeted areas including your back, neck, shoulders and calves. Hot Spring Spas revolutionized spa industry with this one-of-a-kind moving jet that cascades up and down your back.

Why does my hot spring Vanguard not heat?

I have a hot spring vanguard that will not heat. My heater relay board checks out ok, but on the main circuit board the lem light is lit but the heater led is not lit. On my control panel the red power light is lit, but after a few seconds of turning on the power the green ready light starts to flash.

What to do if your hot springs are not heating?

• Circulation pump thermal cut-off tripped – check for clogged filters or air locks in plumbing. Disconnect power to the spa, allow circulation pump to cool. Circulation pump thermal cut-off will reset when pump has cooled and power is reapplied. Contact our customer service team for service if circulation pump thermal cut-off trips frequently.

How do you turn off a hot spring heater relay board?

Now turn off the power to your spa. Either unplug it if it’s 120 volt model or turn off the breakers if it’s wired 240 volts. Find where the black and white wire from the heater’s power cord connect onto the front of the heater relay board.

What kind of jets do hot spring spas use?

The Jetsetter Jet System offers an incredible 22 jets that relieve-tension in targeted areas including your back, neck, shoulders and calves. Hot Spring Spas revolutionized spa industry with this one-of-a-kind moving jet that cascades up and down your back.

How does the jetsetter system work in a hot tub?

Is there an error code on my hot spring?

So, when you see an error code on your spa’s control panel, you might worry that you’ve lost your chance. But don’t fret! Hot Spring ® spa systems are reliable and will last a long time with regular maintenance, but issues do sometimes arise.

How big is a jetsetter 3 person hot tub?

The Jetsetter ™ LX is ideal for those looking for a small luxury hot tub that offers all the features of a large spa. This spa fits well in areas where space is limited, yet still offers a 84 cm depth and enough room to comfortably seat up to three people. This rectangular hot tub is ideal for smaller patios, gardens and decks.

Please keep this manual available for reference. If you have any questions about any aspect of your spa’s set-up, operation or maintenance, contact your authorized Hot Spring®Spa dealership. They are trained professionals who are familiar with the product as well as new spa ownership concerns.

Where can I buy hot spring spa parts?

Hot Tub Spa Supplies is the largest online dealer of Hot Spring hot tub & spa parts in the United States. All spa replacement parts sold on this website are new factory packaged. We offer FREE SHIPPING to the lower 48 states on orders over $299. Have questions about the right replacement parts for your spa?

How to see the depth of a jetsetter hot tub?

Drag the hot tub left or right to see a detailed, 360-degree view of the spa seating, jet placement, spa shell and cabinet. Turn the spa to see the hot tub depth and look closely at the available jets.

Can You troubleshoot a hot springs pool pump?

Troubleshooting a pump is a no-brainer for many, but if you have any doubts of what to do, then call the professionals here at Hot Springs Pools & Spas! We care about your safety first and deal with spas on a daily basis, so we can identify a problem quicker than a regular handy-man.

How does the jet pump work in a hot tub?

The number of filters is matched to the power of the jet pumps to provide balanced filtration, allowing 100% of your spa water to pass through the filters 100% of the time – even when the jets are on, which is when other spas bypass the filters.

What kind of jet pump does a hot spring Jetsetter use?

This Wavemaster® 5000 1.5HP jet pump was used on the 1997-2000 Hot Spring Jetsetter, 1997-2000 Tiger River Sumatran and 1997 Tiger River Bengal spa models. What spa brand do you have?:

How to turn on Jets for 120 V spa?

For 120 v spas, plug in and immediately turn on jets for 10 minutes. Either way, turn the diverter handle (if applicable)slowly 360° (Vista, Grandee GG version, Grandee CC version, Envoy, Siberian, Caspian, Pulse, Flair & Glow models, turn on the 30 amp breaker first, run jets for 10 mins, then the 20amp)

What to do if your circ pump is not working?

Check that your power is on, the breaker or GFCI test button are not tripped, all valves are in the open position. Follow the circ pump plumbing, and look for any kinks in the hose.

How to turn on Jets in hot spring pool?

HOT SPRING ONLY: For 240 v spas, turn on the 20 amp breaker and run jets 10 mins, then turn on the 30 amp breaker and continue to run jets 30 min. For 120 v spas, plug in and immediately turn on jets for 10 minutes.

Check that your power is on, the breaker or GFCI test button are not tripped, all valves are in the open position. Follow the circ pump plumbing, and look for any kinks in the hose.