Can a hot water heater go in the attic?
No, it is unsafe to have your water heater in your attic since it can break, leak, and cause water damage before someone notices. Moving it downstairs to a first floor interior closet or garage is the safest option.
When to use master thermostat for space heating?
Where a combination potable water heating and space heating system requires water for space heating at temperatures greater than 140°F (60°C), a master thermostatic mixing valve complying with ASSE 1017 shall be provided to limit the water supplied to the potable hot water distribution system to a temperature of 140°F (60°C) or less.
Can a gas water heater be installed in an attic?
Water heaters using solid, liquid or gas fuel shall not be installed in a room containing air-handling machinery where such room is used as a plenum. Attics containing a water heater shall be provided with an opening and unobstructed passageway large enough to allow removal of the water heater.
Can a multi point heater be used with a central heating system?
An ordinary multi point heater will only supply water to the domestic water system but can be installed in conjunction with an ordinary central heating boiler. A combination boiler combines the functions of a central heating boiler and an instantaneous multi point water heater, giving priority to the supply of domestic hot water.
Where is the thermostatic mixer in a hot water system?
An integral feed and expansion tank can be incorporated on top of the main tank. This system is so efficient, a thermostatic (cold/hot) mixer valve is built into the pipework before the hot reaches the taps or shower.
Can a water heater be installed in the attic?
Because of this complication, most homes that have a slab foundation also have the water heater in the attic. The attic may also be where the HVAC system is installed. What you may not realize is that a water heater in your attic can cause some serious problems for you as a homeowner.
Where is the cold water branch line on a water heater?
The cold water branch line from the main water supply line to each hot water storage tank or water heater shall be provided with a valve, located near the equipment and serving only the hot water storage tank or water heater. The valve shall not interfere or cause a disruption of the cold water supply to the remainder of the cold water system.
What is the International Building Code for water heaters?
Where earthquake loads are applicable in accordance with the International Building Code, water heater supports shall be designed and installed for the seismic forces in accordance with the International Building Code. 502.5 Clearances for maintenance and replacement.
