Can a com1000 be mounted on an atsc-8?
The ATSC-8 is rack mountable and can be easily mounted in the same location as the COM1000 system. It is recommended that at least 1RU of space be left between the ATSC-8, the COM1000, and any other components so that each component will receive good air-flow in the mounting location. Connecting an antenna:
What does Technicolor atsc-8 digital head end system do?
This document describes the process and procedures for integrating the ATSC-8 product with the COM1000 digital head-end system. The ATSC-8, available from Technicolor, will allow for the reception of over-the-air broadcasts of digital broadcasts and output of this content over an Internet Protocol (IP) output.
How many IP addresses does an atsc-8 have?
The ATSC-8 will also generate an Auto-IP address such that a PC connected directly to the unit without a router can communicate to the device. Each ATSC-8 has 4 tuning modules containing 2 tuners each. Each Tuning module can have two unique IP addresses, so in total, the ATSC-8 will have 8 unique IP addresses (two for each tuning module).
What kind of bandwidth does an ATSC signal have?
ATSC signals use the same 6MHz bandwidth as analog NTSC television channels, but are able to provide many programs within this digital broadcast contained on sub-channels. For instance, many broadcasters will have a main channel located in the .1 sub-channel, and provide other secondary channels on .2 and .3 sub-channels.
This document describes the process and procedures for integrating the ATSC-8 product with the COM1000 digital head-end system. The ATSC-8, available from Technicolor, will allow for the reception of over-the-air broadcasts of digital broadcasts and output of this content over an Internet Protocol (IP) output.
Are there any TVs that have ATSC 3.0 tuners?
The tuner section of the tv is going to be the same no matter what ATSC 3.0 features the broadcasters decide to use/transmit, so put ATSC 3.0-capable tuners in the tvs and tweak the firmware later, if need-be. Sony is already selling ATSC 3.0 tuner chips.
The ATSC-8 is rack mountable and can be easily mounted in the same location as the COM1000 system. It is recommended that at least 1RU of space be left between the ATSC-8, the COM1000, and any other components so that each component will receive good air-flow in the mounting location. Connecting an antenna:
ATSC signals use the same 6MHz bandwidth as analog NTSC television channels, but are able to provide many programs within this digital broadcast contained on sub-channels. For instance, many broadcasters will have a main channel located in the .1 sub-channel, and provide other secondary channels on .2 and .3 sub-channels.
